The ELRING brand Seal, oil pump is necessary to ensure a tight fit of the accessory cover to its housing. Loss of tightness entails a decrease in oil pressure in the system. Seals for the oil pump are made by stamping. Cardboard, paper, paronite, cork can be used as material. In rare cases, such pads can be made of leather.

1. DUCATO Van (250_, 290_)
2. DUCATO Bus (250_, 290_)
3. DUCATO Bus (250_, 290_, 560_)
4. DUCATO Platform/Chassis (250_, 290_)
5. BOXER Bus
6. MANAGER Bus
7. BOXER Van
8. MANAGER Van
9. BOXER Platform/Chassis
10. MANAGER Platform/Chassis
11. JUMPER Bus
12. RELAY Bus
13. JUMPER Van
14. RELAY Van
15. JUMPER Platform/Chassis
16. RELAY Platform/Chassis
17. MASSIF Station Wagon
18. MASSIF Single Cab
19. MASSIF Pickup
20. DAILY IV Platform/Chassis
21. See more in applications

The operation of the oil pump seal

It is necessary to interfere with the operation of the oil pump much less often than other components. This means that you rarely have to disassemble it and change the seal. And, regardless of the material of manufacture, as a result of long-term operation of the unit, the seal "sticks" to one or both of the adjoining surfaces of the cover and the oil pump housing. Therefore, when disassembling it, it is better to replace the seal, after carefully cleaning the abutment surfaces from the remnants of the old seal.

In the case of installing a new pump, the seal must be changed without fail, even if it has not adhered to the cover or flange of the housing and looks completely new. Crimping the seal always occurs "individually" - in strict accordance with the configuration of specific mating planes. As a result, the deformable areas of the seal may not match the shape of the new cover, which will lead to a leak.