The oil cooler consists of heat pipes and plates for circulating heated oil. It is inside this device that the lubricant is cooled to a safe temperature. There are systems with natural and artificial cooling. The latter is equipped with an additional turbine, which creates a powerful air flow for better cooling. Thanks to the optimized radiator design and efficient piping system, stagnation is avoided and used oil is completely drained if necessary.

The THERMOTEC brand Oil Cooler, engine oil is designed to supply cooled oil to the engine and maintain the normal temperature of the system when using high power. Thanks to this, the service life of the engine increases, the oil does not lose its viscosity, the pressure in the system remains normal. A constant temperature is maintained thanks to a thermostat, the valve of which lets oil into the radiator only when it is heated.

1. BOXER Bus
2. MANAGER Bus
3. BOXER Van
4. MANAGER Van
5. BOXER Platform/Chassis
6. MANAGER Platform/Chassis
7. TRANSIT Bus (FD_ _, FB_ _, FS_ _, FZ_ _, FC_ _)
8. TRANSIT Van (FA_ _)
9. TRANSIT Platform/Chassis (FM_ _, FN_ _, FF_ _)
10. JUMPER Bus
11. RELAY Bus
12. JUMPER Van
13. RELAY Van
14. JUMPER Platform/Chassis
15. RELAY Platform/Chassis
16. TRANSIT TOURNEO Bus
17. DUCATO Bus (250_, 290_)
18. DUCATO Bus (250_, 290_, 560_)
19. DUCATO Van (250_, 290_)
20. DUCATO Platform/Chassis (250_, 290_)
21. See more in applications

The principles of the oil cooler

During operation, the oil cooler and its tubes can wear out and fail. Small particles, dust and other contaminants are clogged into the honeycomb, which significantly reduces heat transfer. Therefore, periodically clean the system for more efficient cooling.

The need to replace the radiator may be indicated by thickening of the lubricant and the appearance of a characteristic plaque on the wall of the expansion tank. Operating your vehicle with a worn-out oil cooler can cause engine damage.