€28.74
Warning!
Warning!
Warning!
Tie Rod End - G1-1217 OPTIMAL
Tie Rod End - G1-1217 OPTIMAL
€13.78
- Part Number: G1-1217
- Brand: OPTIMAL
- Type: Tie Rod End
Reviews
There is no reviews
yet
Good quality! Super fast delivery. Thank you a
lot :)
The steering rods connect the steering gear and the wheel, it is through them that the driver transfers the steering force from the steering gear to the wheels. The OPTIMAL brand Tie Rod End is attached to the steering rack rod by means of an inner end, to the middle rod of the trapezium - by means of a swivel joint. The rods are connected to the steering knuckle through an external tie rod end.
Internal tie rod ends and ball joints provide vertical mobility of the link - otherwise the links would break off when the vehicle is driven over uneven surfaces. The outer tie rod end provides mobility of the rod and wheel in any plane - so the drive can work normally on turns, pits without damage.
You can purchase the following models from us:- TRAFIC II Bus (JL)
- PRIMASTAR Bus (X83)
- PRIMASTAR Van (X83)
- VIVARO A Platform/Chassis (X83)
- VEL SATIS (BJ0_)
- VIVARO A Bus (X83)
- VIVARO A Van (X83)
- LAGUNA II (BG0/1_)
- LAGUNA II Grandtour (KG0/1_)
- LAGUNA II Sport Tourer (KG0/1_)
- TRAFIC II Van (FL)
- TRAFIC Van (FL)
- ESPACE IV (JK0/1_)
- ESPACE Mk IV (JK0/1_)
- TRAFIC II Platform/Chassis (EL)
- TRAFIC II Rodeo (EL)
- PRIMASTAR Platform/Chassis (X83)
- TRAFIC III Van (FG_)
- VIVARO B Bus (X82)
- VIVARO B Van (X82)
- See more in applications
The construction of the tie rod end
As for the device, the rod itself resembles a steel bar. The device of the tie rod end is more complicated, since it serves to connect movable and fixed elements. In fact, it is a swivel joint where the sphere of the pin rotates inside a hemispherical body. A bushing is installed in the body, grease is packed to avoid friction and to allow the pin to deflect at a predetermined angle. The hinge protects the rubber boot.
Tech Data
Applications
Delivery
Warranty
Reference Numbers
Tech Data
| Fitting Position | outer |
| Fitting Position | Front Axle Left |
| Length [mm] | 210 |
| Required quantity | 1 |
| Cone Size [mm] | 12 |
| Internal Thread [mm] | M14 x 1,50 RHT F |
| External Thread [mm] | M10 x 1,25 RHT M |
| paired article number | G1-1218 |
| Registration Type | TÜV®/GS tested |
Applications
Interchange Parts
Delivery
ELart is happy to coordinate the shipping of our products around the world. All the products is ready for immediate dispatch with:
- Economy post shipping takes up from 6 to 12 days to deliver in Europe and 12-31 days to America or Australia;
- Standard post shipping with tracking number, delivery time usually takes 4-7 days in Europe;
- Express/next day delivery options available by UPS and DHL.
Returns Policy
Buyers of our store have the right to exchange or return the goods purchased from us within the first 60 days after purchase.
Please note - exchange or refund is only due to a new product that has not been in use and has no signs of use: scratches, chips, rubs, etc.
And also should be saved:
- Complete set of goods;
- Integrity and all components of packaging;
- Factory marking.
Warranty
There is no any data available.
Reference Numbers
| BENDIX | |
| DELPHI | |
| FAI AutoParts | |
| FAI AutoParts | |
| FAI AutoParts | |
| FEBI BILSTEIN | |
| FIAT | |
| FIRST LINE | |
| FLENNOR | |
| FRAP | |
| GENERAL MOTORS | |
| GENERAL MOTORS | |
| LEMFÖRDER | |
| LEMFÖRDER | |
| LEMFÖRDER | |
| MAPCO | |
| METZGER | |
| MEYLE | |
| MOOG | |
| NISSAN | |
| NISSAN | |
| NISSAN | |
| NK | |
| OCAP | |
| OCAP | |
| OCAP | |
| OCAP | |
| OPEL | |
| OPEL | |
| PEX | |
| QUINTON HAZELL | |
| RENAULT | |
| RENAULT | |
| RENAULT | |
| RHIAG | |
| RHIAG | |
| RUVILLE | |
| SIDEM | |
| TRISCAN | |
| TRW | |
| VAUXHALL | |
| VAUXHALL |
To buy in one click
please fill the form
and we will contact you
please fill the form
and we will contact you
Fill your phone number
and we'll call you back
and we'll call you back