V-belts are used in belt drives, and this type is the most popular among all belts. Unlike flat belts, they are trapezoidal or wedge-shaped in cross-section. As in other belt drives, the torque from the driving V-pulley to the belt and from it to the driven pulley is carried out by frictional forces. But in the V-belt transmission, the side surfaces of the belt are the workers. In this case, the contact patch is much larger than in a flat belt. This means more and the friction force and, consequently, the transmitted torque. To increase the contact patch, it is not necessary to increase the diameter of the pulley. It is wiser, from the point of view of the dimensions of the structure, to choose a pulley with a small diameter, but with several belts.

1. COLT III (C5_A)
2. COLT III (C5_A, RD, RE)
3. COLT Mk III (C5_A)
4. LANCER IV (C6_A, C7_A)
5. LANCER IV (C6_A, C7_A, CA, CB)
6. LANCER Mk IV (C6_A, C7_A)
7. LANCER IV Hatchback (C6_A, C7_A)
8. LANCER IV Hatchback (C6_A, C7_A, CA, CB)
9. LANCER Mk IV Hatchback (C6_A, C7_A)
10. GALANT III (E1_A)
11. GALANT III Saloon (E1_A)
12. SIGMA III (E1_A)
13. GALANT Mk III (E1_A)
14. ETERNA III (E1_A)
15. GALANT IV Saloon (E3_A)
16. GALANT IV Saloon (E3_A, HG, HH)
17. GALANT Mk IV Saloon (E3_A)
18. ETERNA IV Saloon (E3_A)
19. GALANT IV (E3_A)
20. GALANT IV (E3_A, HG, HH)
21. See more in applications

The v-belts usage

When installing the belt drive, parameters such as alignment and tension of the BOSCH brand V-Belt are very important. Deviation from the design values ​​should not exceed the tolerances according to the manufacturer's recommendations.