During operation, the disc brake mechanism is constantly exposed to the negative effects of moisture, dirt and sand. As a result, the sealing cuffs on the pistons and the friction surface on the guide pins wear out, which leads to the blocking of the piston in the caliper or to its misalignment.

1. COLT III (C5_A)
2. COLT III (C5_A, RD, RE)
3. COLT Mk III (C5_A)
4. LANCER IV Hatchback (C6_A, C7_A)
5. LANCER IV Hatchback (C6_A, C7_A, CA, CB)
6. LANCER Mk IV Hatchback (C6_A, C7_A)
7. GALANT III (E1_A)
8. GALANT III Saloon (E1_A)
9. SIGMA III (E1_A)
10. GALANT Mk III (E1_A)
11. ETERNA III (E1_A)
12. GALANT IV Saloon (E3_A)
13. GALANT IV Saloon (E3_A, HG, HH)
14. GALANT Mk IV Saloon (E3_A)
15. ETERNA IV Saloon (E3_A)
16. GALANT IV (E3_A)
17. GALANT IV (E3_A, HG, HH)
18. GALANT Mk IV (E3_A)
19. ETERNA IV (E3_A)
20. ECLIPSE I (D2_A)
21. See more in applications

The usage of the brake pads accessory kit

Metal springs are installed between the brake shoe and the caliper, which absorb the pad. They are also responsible for neutralizing the vibrations of the linings. Otherwise, when the pad is heated to 150-200 degrees Celsius, its base will expand, causing a skew and, as a result, wedging in the knot. This set of springs and plates is called a HERTH+BUSS JAKOPARTS brand Accessory Kit, disc brake pad. They are of two types, which, respectively, are designed for different types of calipers: for floating and for fixed. The first type of mounting kit consists of 4 springs that hold the pad parallel to the surface of the disc. For the fixed type, the repair kit for the pads is the guide pins and springs that press the pad to the caliper.