The starter is designed to start the car engine. It turns the flywheel, which in turn drives the engine's crankshaft.

1. DUCATO Bus (230_)
2. DUCATO Van (230_)
3. JUMPER Van (230L)
4. RELAY Van (230L)
5. JUMPER Platform/Chassis (230)
6. RELAY Platform/Chassis (230)
7. BOXER Van (230L)
8. BOXER FURGON Van (230L)
9. BOXER Platform/Chassis (ZCT_)
10. DUCATO Platform/Chassis (230_)
11. C3 I (FC_, FN_)
12. BOXER Bus (230P)
13. JUMPER Bus (230P)
14. RELAY Bus (230P)
15. BOXER Bus (244, Z_)
16. DUCATO Van (244_)
17. DUCATO Bus (244_)
18. JUMPER Bus (244, Z_)
19. RELAY Bus (244, Z_)
20. DUCATO Platform/Chassis (244_)
21. See more in applications

The starter construction

Electric motors are used with electromagnetic excitation or with permanent magnet excitation. The latter are more modern. They are more compact, simpler, consume less current and have a higher rotational speed, but less torque. Therefore, a gearbox is additionally introduced into the design of such starters to increase the torque.

The solenoid relay is designed to supply power to the electric motor and supply the drive gear to the flywheel rim. When the ignition key is turned to the “Start” position, power is supplied to the relay contacts.

The overrunning clutch (“bendix”) protects the VALEO brand Starter motor from damage after starting the engine. As soon as the crankshaft rpm exceeds the starter motor rpm, the freewheel disconnects the drive gear and the motor shaft.